Magnet size

For all talk related to Robotech RPG Tactics™. A strategic, tactical board game brought to you by Palladium Books®, Ninja Division® and Harmony Gold®

Moderators: Phaze, Immortals, Supreme Beings, Old Ones

User avatar
Alpha 11
Palladin
Posts: 8230
Joined: Wed Apr 20, 2005 4:14 pm
Location: Northwood, ND

Magnet size

Unread post by Alpha 11 »

I've heard and seen some people using really small magnets on their mini's. I'd like to use some myself, but don't know which size. Does anyone here on the boards know the right size?
User avatar
FatherMorpheus
Megaversal® Ambassador
Posts: 423
Joined: Sat Nov 04, 2006 10:17 pm
Comment: Rifts is a framework, if you don't like part of it don't use it.
Location: Milky Way Galaxy
Contact:

Re: Magnet size

Unread post by FatherMorpheus »

I know Phaze had some ideas on this, maybe we can get him to post. :)
User avatar
Forar
Hero
Posts: 883
Joined: Mon Apr 01, 2013 11:18 pm
Location: Toronto, Ontario, Canada

Re: Magnet size

Unread post by Forar »

You can get hundreds of 'rare earth magnets' on ebay for a couple of dollars. I'd look at the 1mm x 2mm and 1mm x 3mm ones.

You'll also want a 'pin vise', a little hand drill, and an appropriately sized bit. Allows for fine control when drilling a tiny bit into these figures/pieces.

If you want to reduce issues with polarities, you can use a magnet in one side and a small piece of metal (clipping from a thin nail, pin, paper clip, etc) on the other.

There are some very good guides to be found on Youtube and Google that go further into detail.
User avatar
Alpha 11
Palladin
Posts: 8230
Joined: Wed Apr 20, 2005 4:14 pm
Location: Northwood, ND

Re: Magnet size

Unread post by Alpha 11 »

Thanks for the info.
Post Reply

Return to “Robotech RPG Tactics™”